Collaborative Optimization of Structures With Periodic Composite Materials
-
摘要: 在传统双向渐进结构优化(BESO)方法基础上,充分考虑微观尺度和宏观尺度之间的相互耦合作用,通过等效弹性模量和灵敏度分析将复合材料微结构胞元设计和宏观结构拓扑优化相结合,建立周期性复合材料构型及结构一体化优化设计方法.为了消除“灰色区域”,假设了材料微结构01属性及在宏观结构空间排列的均一性,提高了优化结果的实际工程适用性.相关算例说明该方法可以有效地在宏观结构优化的同时得到与之相对应的材料微观最佳拓扑形状,也为不同给定宏观结构的微观周期性复合材料设计提供了有效手段.Abstract: In view of the coupling effects between the micro scale and macro scale, the structure-material collaborative optimization method was established based on the traditional bi-directional evolutionary topology optimization method. The equivalent elastic modulus and sensitivities were obtained with the homogenization theory, and these properties were integrated into the material unit cell design and macrostructure optimization. To eliminate the gray area, the 0-1 properties of the materials and uniformity of the macrostructure permutation were hypothesized for deduction, which made the results manufacturable. Several numerical examples were presented to validate that the proposed optimization algorithm is effective for the material unit cell design and macrostructure optimization. The method also can be used for the periodic composite material design under given macrostructures.
-
[1] Kim Y Y, Yoon G H. Multi-resolution multi-scale topology optimization—a new paradigm[J]. International Journal of Solids and Structures,2000,37(39): 5529-5559. [2] Pedersen P. On optimal shapes in materials and structure[J]. Structural and Multidisciplinary Optimization,2000,19(3): 169-182. [3] Rodrigues H, Guedes J M, Bendsoe M P. Hierarchical optimization of material and structure[J]. Structural and Multidisciplinary Optimization,2002,24(1): 1-10. [4] 张卫红, 汪雷, 孙士平. 基于导热性能的复合材料微结构拓扑优化设计[J]. 航空学报, 2006,27(6): 1229-1233.(ZHANG Wei-hong, WANG Lei, SUN Shi-ping. Topology optimization for microstructures of composite materials based on thermal conductivity[J]. Act Aeronautica et Astronautica Sinica,2006,27(6): 1229-1233.(in Chinese)) [5] 鲁大伟, 李书, 任善. 复合材料微结构多目标自适应拓扑优化[J]. 复合材料学报, 2008,25(1): 192-195.(LU Da-wei, LI Shu, REN Shan. Multiple objectives adaptive topology optimization for microstructures of composite materials[J]. Acta Materiae Compositae Sinica,2008,25(1): 192-195.(in Chinese)) [6] 刘远东, 尹益辉, 郭中泽. 尺度关联的微结构构型与排布的材料/结构动力学设计[J]. 复合材料学报, 2011,28(4): 180-184.(LIU Yuan-dong, YIN Yi-hui, GUO Zhong-ze. Dynamic design associating materials and structures with scale-coupled effect[J]. Acta Materiae Compositae Sinica,2011,28(4): 180-184.(in Chinese)) [7] Liu L, Yan J, Cheng G. Optimum structure with homogeneous optimum truss-like material[J]. International Journal of Computer and Structure,2008,86(13): 1417-1425. [8] 刘岭, 阎军, 程耿东. 考虑均一微结构的结构/材料两级协同优化[J]. 计算力学学报, 2008,25(1): 29-34.(LIU Ling, YAN Jun, CHENG Geng-dong. Structure-material concurrent optimization considering uniform material microstructure[J]. Chinese Journal of Computational Mechanics,2008,25(1): 29-34.(in Chinese)) [9] ZHANG Wei-hong, SUN Shi-ping. Scale-related topology optimization of cellular materials and structures[J]. International Journal for Numerical Methods in Engineering,2000,68(9): 993-1011. [10] Hassani B, Hinton E. A review of homogenization and topology optimization I—homogenization theory for media with periodic structure[J]. Computers & Structures,1998,69(6): 707-717. [11] 孙士平, 张卫红. 多相材料微结构多目标拓扑优化设计[J]. 力学学报, 2006,38(5): 633-638.(SUN Shi-ping, ZHANG Wei-hong. Multiple objective topology optimal design of multiphase microstructures[J]. Chinese Journal of Theoretical and Applied Mechanics,2006,38(5): 633-638.(in Chinese)) [12] CHEN Yu-hang, Schellekens M, ZHOU Shi-wei, Cadman J, LI Wei, Appleyard R, LI Qing. Design optimization of scaffold microstructures using wall shear stress criterion towards regulated flow-induced erosion[J]. Journal of Biomechanical Engineering,〖STHZ〗133(8): 0810081-08100810. doi: 10.1115/1.4004918. [13] Huang X, Xie Y M. A new look at ESO and BESO optimization methods[J]. Structural and Multidisciplinary Optimization,2008,35(1): 89-92. [14] Huang X, Zhou S W, Xie Y M, Li Q. Topology optimization of microstructures of cellular materials and composites for macrostructures[J]. Computational Materials Science,2013,67: 397-407. [15] ZUO Zhi-hao, HUANG Xiao-dong, RONG Jian-hua, XIE Yi-min. Multi-scale design of composite materials and structures for maximum natural frequencies[J]. Materials & Design,2013,51: 1023-1034.
点击查看大图
计量
- 文章访问数: 1221
- HTML全文浏览量: 99
- PDF下载量: 840
- 被引次数: 0