有限高狭长压电体中共线双半无限裂纹问题的解析解

卢子兴; 刘萍; 郭俊宏

doi:10.3879/j.issn.1000-0887.2011.11.005

有限高狭长压电体中共线双半无限裂纹问题的解析解

doi: 10.3879/j.issn.1000-0887.2011.11.005

北京航空航天大学固体力学研究所,北京 100191

基金项目: 国家自然科学基金资助项目(10932001;11072015);高等学校博士学科点专项科研基金资助项目(20101102110016)

详细信息

作者简介:
卢子兴(1960- ),男,河北人,教授,博士生导师(联系人.Tel:+86-10-82317507;Fax:+86-10-82328501;E-mail:luzixing@buaa.edu.cn);刘萍(1988- ),女,江西人,硕士生(E-mail:liupingbj2008@yahoo.cn).

中图分类号: O346.1
计量
- 文章访问数: 1624
- HTML全文浏览量: 177
- PDF下载量: 727
- 被引次数: 0
出版历程
- 收稿日期: 2011-04-25
- 修回日期: 2011-08-30
- 刊出日期: 2011-11-15

Exact Solutions of Two Semi-Infinite Collinear Cracks in a Piezoelectric Strip

Institute of Solid Mechanics, Beihang University, Beijing 100191, P. R. China

摘要

摘要: 通过引入合适的保角变换，利用复变函数法，分析了部分裂纹面上受反平面剪应力和面内电载荷共同作用下有限高狭长压电体中含共线双半无限裂纹问题，导出了电不可通边界条件下两个裂纹尖端场强度因子和机械应变能释放率的解析解．当不考虑电场作用时，所得解可退化到经典弹性材料的情况．而当两裂纹尖端的距离趋于无穷大时，也可退化为狭长压电体中半无限裂纹问题的解．最后，通过数值算例，讨论了受载长度、狭长体高度、机电载荷对机械应变能释放率的影响规律以及两个裂纹之间的相互作用．结果表明，两裂纹尖端的距离越短，材料越容易破坏；且机电载荷对左尖端裂纹的扩展影响更为显著．
- 狭长压电体 /
- 共线双半无限裂纹 /
- 复变函数法 /
- 场强度因子 /
- 机械应变能释放率
Abstract: Using the complex variable function method and the technique of the conformal mapping,the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip was studied under the antiplane shear stress and in-plane electric load on the partial crack surface.The analytic solutions of the field intensity factors and the mechanical strain energy release rate were derived under the assumption that the surface of crack was electrically impermeable.The present results can be reduced to the well-known solutions for a purely elastic material in the absence of electric load.Moreover,when the distance between the two crack tips tends to infinity,the analytic solutions of a semi-infinite crack in a piezoelectric strip were obtained.Finally,numerical examples were given to show the influences of the loaded crack length,the height of strip,the distance between the two crack tips,and the applied mechanical/electric loads on the mechanical strain energy release rate.It shows that the material is easier to fail when the distance between the two crack tips becomes shorter.Moreover,the mechanical/electric loading has greater influence on the propagation of the left crack than that of the right one.
- piezoelectric strip /
- two semi-infinite collinear cracks /
- complex variable function method /
- field intensity factor /
- mechanical strain energy release rate

HTML全文

参考文献(17)

[1]	Pak Y E. Crack extension force in a piezoelectric material[J]. Journal of Applied Mechanics, 1990, 57(3): 647-653. doi: 10.1115/1.2897071
[2]	ZHANG Tong-yi, GAO Cun-fa. Fracture behaviors of piezoelectric materials[J]. Theoretical and Applied Fracture Mechanics, 2004, 41(1/3): 339-379. doi: 10.1016/j.tafmec.2003.11.019
[3]	方岱宁, 刘金喜. 压电与铁电体的断裂力学[M]. 北京：清华大学出版社, 2008. (FANG Dai-ning, LIU Jing-xi. Fracture Mechanics of Piezoelectric and Ferroelectric Solids[M]. Beijing: Tsinghua University Press, 2008. (in Chinese))
[4]	王保林. 压电材料及其结构的断裂力学[M]. 北京：国防工业出版社, 2003. (WANG Bao-lin. Failure Mechanics of Piezoelectric Materials and Structures[M]. Beijing: National Defense Industry Press, 2003. (in Chinese))
[5]	QIN Qing-hua. Fracture Mechanics of Piezoelectric Materials[M]. Southampton: WIT Press, 2000.
[6]	WANG Yong-jian, GAO Cun-fa. The mode III cracks originating from the edge of a circular hole in a piezoelectric solid[J]. International Journal of Solids and Structures, 2008, 45(16): 4590-4599. doi: 10.1016/j.ijsolstr.2008.04.001
[7]	GUO Jun-hong, LU Zi-xing, HAN Hai-tao, YANG Zhen-yu. Exact solutions for anti-plane problem of two asymmetrical edge cracks emanating from an elliptical hole in a piezoelectric material[J]. International Journal of Solids and Structures, 2009, 46(21): 3799-3809. doi: 10.1016/j.ijsolstr.2009.07.002
[8]	GUO Jun-hong, LU Zi-xing, HAN Hai-tao, YANG Zhen-yu. The behavior of two non-symmetrical permeable cracks emanating from an elliptical hole in a piezoelectric solid[J]. European Journal of Mechanics A/Solids, 2010, 29(4): 654-663. doi: 10.1016/j.euromechsol.2010.01.001
[9]	GUO Jun-hong, LU Zi-xing, FENG Xiang. The fracture behavior of multiple cracks emanating from a circular hole in piezoelectric materials[J]. Acta Mechanica, 2010, 215(1/4): 119-134. doi: 10.1007/s00707-010-0327-4
[10]	WANG Bao-lin, ZHANG Xing-hong. A mode III crack in a functionally graded piezoelectric material strip[J]. Journal of Applied Mechanics, 2004, 71(3): 327-333. doi: 10.1115/1.1755692
[11]	ZHONG Zheng, SHU Dong-wei, JIN B. Analysis of a mode III crack in a functionally gradient piezoelectric material[J]. Materials Science Forum, 2003, 423/425: 623-628. doi: 10.4028/www.scientific.net/MSF.423-425.623
[12]	Razzaq A A, Hussain R, Gao C F, Yu J H. Two-dimensional analysis of a semi-infinite crack in piezoelectric media[J]. Mechanics Research Communications, 1998, 25(6): 695-700. doi: 10.1016/S0093-6413(98)00089-5
[13]	刘淑红,郭增强,邹振祝. 含半无限长裂纹压电材料的Ⅲ型强度因子[J]. 中国安全科学学报, 2003, 13(9): 62-64. (LIU Shu-hong, GUO Zeng-qiang, ZOU Zhen-zhu. Model-Ⅲ intensity factors of semi-infinite crack in a piezoelectric material[J]. China Safety Science Journal, 2003, 13(9), 62-64. (in Chinese))
[14]	WANG Bao-lin, MAI Yiu-wing. Impermeable crack and permeable crack assumptions, which one is more realistic?[J]. Journal of Applied Mechanics, 2004, 71(4): 575-578. doi: 10.1115/1.1748294
[15]	郭俊宏, 刘萍, 卢子兴, 秦太验. 有限高狭长压电体中半无限反平面裂纹分析[J]. 应用数学和力学, 2011, 32(1):72-78.（GUO Jun-hong, LIU Ping, LU Zi-xing, QIN Tai-yan. Anti-plane analysis of a semi-infinite crack in a piezoelectric strip[J]. Applied Mathematics and Mechanics(English Edition), 2011, 32(1):75-82.）
[16]	SHEN Da-wei, FAN Tian-you. Exact solutions of two semi-infinite collinear cracks in a strip[J]. Engineering Fracture Mechanics, 2003, 70(6): 813-822. doi: 10.1016/S0013-7944(02)00083-8
[17]	Park S B, Sun C T. Fracture criteria for piezoelectric ceramics[J]. Journal of the American Ceramic Society, 1995, 78(6): 1475-1480. doi: 10.1111/j.1151-2916.1995.tb08840.x