GAO Da-peng, LIU Tian-yu, WANG Tian-jiao, YUAN He, WANG Dong>, LI Yong, LIU Ying-bo. Research Progress and Development Trend of Numerical Simulation Technology for Unconventional Wells[J]. Applied Mathematics and Mechanics, 2015, 36(12): 1238-1256. doi: 10.3879/j.issn.1000-0887.2015.12.003
Citation: GAO Da-peng, LIU Tian-yu, WANG Tian-jiao, YUAN He, WANG Dong>, LI Yong, LIU Ying-bo. Research Progress and Development Trend of Numerical Simulation Technology for Unconventional Wells[J]. Applied Mathematics and Mechanics, 2015, 36(12): 1238-1256. doi: 10.3879/j.issn.1000-0887.2015.12.003

Research Progress and Development Trend of Numerical Simulation Technology for Unconventional Wells

doi: 10.3879/j.issn.1000-0887.2015.12.003
Funds:  The National Science and Technology Major Project of China(2011ZX05010-002)
  • Received Date: 2014-12-10
  • Rev Recd Date: 2015-10-27
  • Publish Date: 2015-12-15
  • Compared with the numerical simulation of conventional wells, the numerical simulation of unconventional wells focuses on the characterization of multiphase flow in vertical and horizontal wellbores, the explanation of the velocity difference between different phases and the pressure loss due to friction, hydrostatic force, acceleration and slip of each phase, and the simulation of the downhole flow control equipment and other complex phenomena. The research progress and existing defects of the numerical simulation techniques for unconventional wells were summarized from 7 aspects including the flow equations for complex-structure wells, the multiphase pipe flow and well-reservoir coupling simulation, the multi-segment well model, the downhole flow control device simulation, the near-wellbore area coarsening, the downhole complex phenomena simulation and the embedded discrete fracture model. The wellbore-reservoir numerical coupling simulation based on the multi-segment well model, the extended well model and the reservoir model coupling simulation, the fluid-structure coupling numerical simulation, the downhole monitoring control equipment simulation, and the multi-segment fracture complex-structure well simulation, make the development trend in the future.
  • loading
  • [1]
    赵文智, 胡永乐, 罗凯. 边际油田开发技术现状、挑战与对策[J]. 石油勘探与开发, 2006,33(4): 393-398.(ZHAO Wen-zhi, HU Yong-le, LUO Kai. Status quo, challenges and future strategies of development technology for marginal oil in China[J]. Petroleum Exploration and Development,2006,33(4): 393-398.(in Chinese))
    [2]
    Lee W J, Slidle R E, McVay D A. Reservoir simulation: a reliable technology[C]//SPE Annual Technical Conference and Exhibition.Denver, Colorado, USA, 2011.
    [3]
    Holmes J A. Modeling advanced wells in reservoir simulation[J].Journal of Petroleum Technology,2001,53(11): 54-66.
    [4]
    Dumkwu F A, Islam A W, Caelson E S. Review of well models and assessment of their impacts on numerical reservoir simulation performance[J].Journal of Petroleum Science and Engineering,2012,82/83: 174-186.
    [5]
    Kuppe F, Settari A. A practical method for determining the productivity of multi-fractured horizontal wells[C]// Annual Technical Meeting.Calgary, Alberta, Canada, 1996.
    [6]
    Guo B, Schechter D S. A simple and rigorous mathematical model for estimating inflow model for a horizontal well[C]// SPE Asia Pacific Oil and Gas Conference and Exhibition.Kuala Lumpur, Malaysia, 1997.
    [7]
    Wan J, Aziz K. Semi-analytical well model of horizontal wells with multiple hydraulics fractures[J]. SPE Journal,2002,7(4): 437-445.
    [8]
    Wei Y, Economides M J. Transverse hydraulic fracture from a horizontal well[C]// SPE Annual Technical Conference and Exhibition.Dallas, Texas, USA, 2005.
    [9]
    GUO Bo-yun, YU Xian-ce. A simple and accurate mathematical model for predicting productivity of multifractured horizontal wells[C]// CIPC/SPE Gas Technology Symposium 2008 Joint Conference.Calgary, Alberta, Canada, 2008.
    [10]
    YUAN Hong, ZHOU De-sheng. A new model for predicting inflow performance of fractured horizontal wells[C]//SPE Western Regional Meeting.Anaheim, California, USA, 2010.
    [11]
    Kamkom R. Modeling performance of horizontal, undulating and multilateral wells[D]. PhD Thesis.College Station, Texas: Texas A&M University, 2007.
    [12]
    Kamkom R, ZHU Ding, Bond A J. Predicting undulating-well performance[J]. SPE Prodction & Operations,2009,24(1): 194-207.
    [13]
    程林松, 李春兰, 郎兆新, 张丽华. 分支水平井产能的研究[J]. 石油学报, 1995,16(2): 19-55.(CHENG Lin-song, LI Chun-lan, LANG Zhao-xin, ZHANG Li-hua. The productivity study of branch a horizontal well with multiple branched wells[J].Acta Petrolei Sinica,1995,16(2): 19-55.(in Chinese))
    [14]
    Salas J R, Clifford P J, Jenkins D P. Multilateral well performance prediction[C]// SPE Western Regional Meeting.Anchorage, Alaska, USA, 1996.
    [15]
    Wolfsteiner C, Durlofsky L J, Aziz K. Approximate model for productivity of nonconventional wells in heterogeneous reservoirs[J]. SPE Journal,2000,5(2): 218-226.
    [16]
    王晓冬, 于国栋, 李治平. 复杂分支水平井产能公式[J]. 石油勘探与开发, 2006,33(6): 729-733.(WANG Xiao-dong, YU Guo-dong, LI Zhi-ping. Productivity of horizontal wells with complex branches[J].Petroleum Exploration and Development,2006,33(6): 729-733.(in Chinese))
    [17]
    GUO Bo-yun, ZHOU Jin-kui, LING Ke-gang. A rigorous composite-inflow-performance relationship model for multilateral wells[J]. SPE Journal,2007,23(2): 241-248.
    [18]
    OUYANG Liang-biao, Aziz K. A simplified approach to couple wellbore flow and reservoir inflow for arbitrary well configurations[C]//SPE Annual Technical Conference and Exhibition.New Orleans, Louisiana, USA, 1998.
    [19]
    Chen W, Zhu D, Hill A D. A comprehensive model of multilateral well deliverability[C]//International Oil and Gas Conference and Exhibition in China.Beijing, China, 2000.
    [20]
    OUYANG Liang-biao, Aziz K. A general single-phase wellbore/reservoir coupling model for multilateral wells[J].SPE Reservoir Evaluation & Engineering,2001,4(4): 327-335.
    [21]
    程林松, 兰俊成. 考虑水平井筒压力损失的数值模拟方法[J]. 石油学报, 2002,23(1): 67-71.(CHENG Lin-song, LAN Jun-cheng. The method of reservoir numerical simulation when considering the pressure drop alone the horizontal wellbore[J].Acta Petrolei Sinica,2002,23(1): 67-71.(in Chinese))
    [22]
    SHI Hua, Holmes J A, Durlofsky L J, Aziz K, Diaz L, Alkaya B, Oddie G. Drift-flux modeling of two-phase flow in wellbores[J].SPE Journal,2005,10(1): 24-33.
    [23]
    SHI Hua, Holmes J A, Diaz L, Durlofsky L J, Aziz K. Drift-flux parameters for three-phase steady-state flow in wellbore[J]. SPE Journal,2005,10(2): 130-137.
    [24]
    Kamkom R, ZHU Ding. Two-phase correlation model for multilateral well deliverability[C]//SPE Annual Technical Conference and Exhibition.Dallas, Texas, USA, 2005.
    [25]
    Vicente R, Ertekin T. Modeling of coupled reservoir and multifractured horizontal well flow dynamics[C]//SPE Annual Technical Conference and Exhibition.San Antonio, Texas, USA, 2006.
    [26]
    王明, 朱维耀, 宋考平. 非牛顿流体多分支水平井产能模型及数值模拟[J]. 大庆石油学院学报, 2006,30(5): 38-41.(WANG Ming, ZHU Wei-yao, SONG Kao-ping. Non-Newtonian fluid mathematical model and numerical simulation of productivity of multilateral wells[J]. Journal of Daqing Petroleum Institute,2006,30(5): 38-41.(in Chinese))
    [27]
    HU Bin, Sagen J, Chupin G, Haugset T, Ek A, Sommersel T. Integrated wellbore/reservoir dynamic simulation[C]//Asia Pacific Oil and Gas Conference and Exhibition.Jakarta, Indonesia, 2007.
    [28]
    Krogstad S, Durlofsky L J. Multiscale mixed-finite-element modeling of coupled wellbore/near-well flow[J]. SPE Journal,2009,14(1): 78-87.
    [29]
    Shiedel M, Sepehrnoori K. Development of a coupled compositional wellbore/reservoir simulator for modeling pressure and temperature distribution in horizontal wells[C]// SPE Annual Technical Conference and Exhibition.New Orleans, Louisiana, USA, 2009.
    [30]
    Faycal Z F, Lakhdar B, Zoubir N. Horizontal well performance flow simulation CFD-application[C]//SPE Production and Operations Conference and Exhibition.Tunis, Tunisia, 2010.
    [31]
    Livescu S, Durlofsky L J, Aziz K, Ginestra J C. A fully-coupled thermal multiphase wellbore flow model for use in reservoir simulation[J]. Journal of Petroleum Science and Engineering,2010,71(3/4):138-146.
    [32]
    YUAN Kun, Bello O. Use of computational fluid dynamics model for evaluating performance of high-pressure, high-temperature wells[C]//SPE Intelligent Energy Conference & Exhibition.Utrecht, The Netherlands, 2014.
    [33]
    Holmes J A, Barkve T, Lund O. Application of a multisegment well model to simulate flow in advanced wells[C]//European Petroleum Conference.The Hague, Netherlands, 1998.
    [34]
    Stone T W, Bennett J, Law D H-S, Holmes J A. Thermal simulation with multisegment wells[C]//SPE Reservoir Simulation Symposium.Houston, Texas, USA, 2001.
    [35]
    Semenova A P, Livescu S, Durlofsky L J, Aziz K. Modeling of multisegmented thermal wells in reservoir simulation[C]//SPE EUROPEC/EAGE Annual Conference and Exhibition.Barcelona, Spain, 2010.
    [36]
    Holmes J A, Byer T J, Edwards D A, Stone T W, Pallister I, Shaw G J, Walsh D. A unified wellbore model for reservoir simulation[C]//SPE Annual Technical Conference and Exhibition.Florence, Italy, 2010.
    [37]
    Edwards D A, Cheng N, Dombrowsky T P, Bowen G, Nasvik H. Representing hydraulic fractures using a multilateral multisegment well in simulation models[C]//SPE Reservoir Simulation Symposium.The Woodlands, Texas, USA, 2013.
    [38]
    Neylon K J, Reiso E, Holmes J A, Nesse O B. Modeling well inflow control with flow in both annulus and tubing[C]//SPE Reservoir Simulation Symposium.The Woodlands, Texas, USA, 2009.
    [39]
    Youngs B, Neylon K J, Holmes J A. Recent advances in modeling well inflow control devices in reservoir simulation[C]//International Petroleum Technology Conference.Doha, Qatar, 2009.
    [40]
    Zarea M A, ZHU Ding. An integerated performance model for multilateral wells equipped with inflow control valves[C]//SPE EUROPEC/EAGE Annual Conference and Exhibition.Vienna, Austria, 2011.
    [41]
    赵国忠, 孙巍, 何鑫. 基于分层注水数学模型的油藏数值模拟[J]. 东北石油大学学报, 2012,36(6): 82-87.(ZHAO Guo-zhong, SUN Wei, HE Xin. Reservoir simulation model based on stratified water injection and its application[J]. Journal of Northeast Petroleum University,2012,36(6): 82-87.(in Chinese))
    [42]
    刘合, 裴晓光, 罗凯, 孙福超, 郑立臣, 杨清海. 中国油气田开发分层注水工艺技术现状与发展趋势[J]. 石油勘探与开发, 2013,40(6): 733-737.(LIU He, PEI Xiao-guang, LUO Kai, SUN Fu-chao, ZHENG Li-chen, YANG Qing-hai. Current status and trend of separated layer water flooding in China[J].Petroleum Exploration and Development,2013,40(6): 733-737.(in Chinese))
    [43]
    Karimi-Fard M, Durlofsky L J. An expanded well model for accurate simulation of well-reservoir interactions[C]//SPE Reservoir Simulation Symposium.The Woodlands, Texas, USA, 2011.
    [44]
    Wolfsteiner C, Durlofsky L J. Near-well radial upscaling for the sccurate modeling of nonconventional wells[C]// SPE Western Regional/AAPG Pacific Section Joint Meeting.Anchorage, Alaska, USA, 2002.
    [45]
    Ding D Y. Coupled simulation of near-wellbore and reservoir models[J]. Journal of Petroleum Science and Engineering,2011,76(1/2): 21-36.
    [46]
    Karimi-Fard M, Durlofsky L J. Accurate resolution of near-well effects in upscaled models using flow-based unstructured local grid refinement[J]. SPE Journal,2012,17(4): 1084-1095.
    [47]
    Nakashima Y, LI Hang-yu, Durlofsky L J. Near-well upscaling for three-phase flows[J]. Computational Geosciences,2012,16(1): 55-73.
    [48]
    RojasD, LI Hang-yu, Kumar M, CHEN Yu-guang. Development and application of near-well multiphase flow upscaling for forecasting of heavy oil primary production[C]//SPE Western Regional & AAPG Pacific Section Meeting 2013 Joint Technical Conference.Monterey, California, USA, 2013.
    [49]
    Holmes J A. Enhancements to the strongly coupled, fully implicit well model: wellbore crossflow modeling and collective well control[C]//SPE Reservoir Simulation Symposium.San Francisco, California, USA, 1983.
    [50]
    Civan F, Triana B V. Rigorous simulation of production from commingled multilayer reservoir under various crossflow and boundary conditions[C]//SPE Production and Operations Symposium.Oklahoma City, Oklahoma, USA, 2013.
    [51]
    Thanyamanta W, Johansen T E, Hawboldt K. Well modeling incorporating nonisothermal effects and asphaltene precipitation[C]//SPE International Symposium on Oilfield Chemistry.Houston, Texas, USA, 2007.
    [52]
    Trina S, Johansen T. An integrated horizontal- and vertical-flow simulation with application to wax precipitation[J].SPE Journal,2012.
    [53]
    ZHANG Xi, Jeffrey R G. The role of friction and secondary flaws on deflection and reinitiation of hydraulic fractures at orthogonal pre-existing fractures[J]. Geophysical Journal International,2006,166(3): 1454-1465.
    [54]
    ZHANG Xi, Thierecelin M J, Jeffrey R G. Effects of frictional geological discontinuities on hydraulic fracture propagation[C]//SPE Hydraulic Fracturing Technology Conference.College Station, Texas, USA, 2007.
    [55]
    Olson J E. Multi-fracture propagation modeling: application to hydraulic fracturing in shale and tight gas sands[C]//The 42nd US Rock Mechanics Symposium (USRMS).San Francisco, California, USA, 2008.
    [56]
    李琴, 陈程, 荀小全. 低渗致密气藏压裂水平井产能预测新方法[J]. 天然气地球科学, 2013,24(3): 633-637.(LI Qin, CHEN Cheng, XUN Xiao-quan. A new method of predicting gas wells’ productivity of fractured horizontal well of low-permeability tight gas reservoir[J]. Natural Gas Geoscience,2013,24(3): 633-637.(in Chinese))
    [57]
    闫相祯, 李向阳. 基于裂缝干涉模型的非常规油气井压裂优化设计软件的开发与应用[J]. 中国石油大学学报, 2013,37(5): 120-127.(YAN Xiang-zhen, LI Xiang-yang. Development and application of unconventional oil & gas well fracturing optimization design software based on fracture network interference model[J]. Journal of China University of Petroleum,2013,37(5):120-127.(in Chinese))
    [58]
    程远方, 董丙响, 时贤, 李娜, 袁征. 页岩气藏三孔双渗模型的渗流机理[J]. 天然气工业, 2012,32(9): 44-47.(CHENG Yuan-fang, DONG Bing-xiang, SHI Xian, LI Na, YUAN Zheng. Seepage mechanism of a triple-porosity/dual-permeability model for shale gas reservoirs[J]. Natural Gas Industry,2012,32(9): 44-47.(in Chinese))
    [59]
    张小涛, 吴建发, 冯曦, 邓惠, 杨济源. 页岩气藏水平井分段压裂渗流特征数值模拟[J]. 天然气工业, 2013,33(3): 47-52.(ZHANG Xiao-tao, WU Jian-fa, FENG Xi, DENG Hui, YANG Ji-yuan. Numerical simulation of seepage flow characteristics of multi-stage fracturing(MSF) in horizontal shale gas wells[J]. Natural Gas Industry,2013,33(3): 47-52.(in Chinese))
    [60]
    LI Li-yong, Lee S H. Efficient field-scale simulation of black oil in a naturally fractured reservoir through discrete fracture networks and homogenized media[J]. SPE Reservoir Evaluation & Engineering,2008,11(4): 750-758.
    [61]
    Mooinfar A, Varavei A, Sepehrnoori K, Johns R T. Development of an efficient embedded discrete fracture model for 3D compositional reservoir simulation in fractured reservoirs[J].SPE Journal,2014,19(2): 289-303.
    [62]
    ZHOU Fang-qi, SHI An-feng, WANG Xiao-hong. An efficient finite difference model for multiphase flow in fractured reservoirs[J].Petroleum Exploration and Development,2014,41(2): 239-243.
    [63]
    Aziz K, Arbabi S, Deutsch C V. Why is it so difficult to predict the performance of horizontal wells?[J]. Journal of Canadian Petroleum Technology,1999,38(10): 37-45.
    [64]
    YUAN Kun, Bello O. Use of computational fluid dynamics model for evaluating performance of high-pressure, high-temperature wells[C]//SPE Intelligent Energy Conference & Exhibition.Utrecht, The Netherlands, 2014.
    [65]
    孟凡净, 刘焜, 王伟. 剪切平行板间密集颗粒流的接触力分布及各向异性分析[J]. 应用数学和力学, 2013,34(7): 714-723.(MENG Fan-jing, LIU Kun, WANG Wei. Contact force distribution and anisotropic analysis in dense granular flow between the shearing parallel plates [J]. Applied Mathematics and Mechanics,2013,34(7): 714-723.(in Chinese))
    [66]
    Edwards D A, Gunasekera D, Morris J, Shaw G, Shaw K, Walsh D, Fjerstad P A, Franco J, Hoang V, Quettier L. 新一代油藏模拟技术[J]. 油田新技术, 2011,23(4): 4-15.(Edwards D A, Gunasekera D, Morris J, Shaw G, Shaw K, Walsh D, Fjerstad P A, Franco J, Hoang V, Quettier L. New generation of reservoir simulation[J]. New Technology of Oilfield,2011,23(4): 4-15.(in Chinese))
    [67]
    Sagen J, Ostenstad M, HU Bin, Henanger K E I, Lien S K, XU Zheng-gang, Groland S, Sira T. A dynamic model for simulation of integrated reservoir, well and pipeline system[C]// SPE Annual Technical Conference and Exhibition.Denver, Colorado, USA, 2011.
    [68]
    Mogbo O C. Intelligent wells: horizontal well simulation for thin oil rims abundant in the niger-delta—a case study[C]//Trinidad and Tobago Energy Resources Conference.Port of Spain, Trinidad, 2010.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1164) PDF downloads(763) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return